我公司生产的大型硫化机设备 青岛鑫业飞机械有限公司生产的平板硫化机设备 我公司生产的橡胶机械产品
产品分类
新闻中心
新闻中心

平板硫化机更换液压缸密封圈的方法

     首先松开柱塞与平台连接的固定圈上的6-M12螺钉,取下固定圈,然后启动油泵,使柱塞升到最高位置(不要升压)用木块把平台顶住,按动下降按钮,使柱塞下降到最低位置,然后松开压紧法兰上的8-M30螺母,取出法兰,即可取出密封圈,更换后,按上述相反顺序把零件装好即可。

    First unscrew the screw 6-M12, which connects the plunger and platform, then start up the oil pump to make the plunger rise to the 
highest position (do not increase the pressure), put a wood beneath the platform as a pad, press the descent button to make the plunger to go to the lowest position, unscrew the nut 8-M30 to token out. After changing a new one, the mounting can be carried out contrary to the above dismantling.